PowerPinner Glider 7105 Rapid Fire

Convenience of a moveable weld head combined with new step welding speeds production!

The new PowerPinner Glider 7105 Rapid Fire has all the features of our standard 7105 welder plus a special program that allows the operator to continuously fasten weld pins while depressing the foot pedal. This option works when the arm is locked in the vertical posistion and the machine is foot pedal activated. The RF will keep welding pins until the operator removes his foot from the pedal. This maximizes speed for the fastest possible pinning operation. Flip a switch and the machine returns to a manual mode for larger pieces of duct work.

The PowerPinner Glider 7105 Rapid Fire features simple, reliable electronic controls and a high output transformer that will fasten 1/2" to 2" pins to 16-26 gauge sheet metal.

Other features include:

Moving Head

Speeds production.

Flange Cutouts

Permit continuous lining of flat or L section flanged duct.

New Improved Reliability

The PowerPinner Glider 7105 Moving Head Welder uses a PLC (Programmable Logic Control) and non-contact proximity sensors in place of pneumatic valves and mechanical actuators.

Easy To Operate

Simple logical controls reduce operation training.

Standard 5 Foot Throat

Fastens large duct sections, reducing material handling.

Front Mounted Component Cabinet

Affords easy access for service needs.

Visual Load Cycle

Quickly confirms electronic functions.

NEMA 12-Rated Electrical Cabinet

Protects electrical component to minimize machine down-time.

Lightweight Foot Pedal

Allows easy movement by operator; cord protector prevents damage.


Place between work tables for efficient work flow.


Input Voltage 190-240 VAC 60Hz, 1 Phase, 30 Amp
Air Requirement: 2-3 CFM, 80 PSI
Working Depth 60"
Anvil Height 36"
Total Depth 71"
Total Width 32"
Weight 800 Lbs.
Freight Class 70

Please call us toll free at 800-753-0393 or email us for a delivered quote to your shop.


Contact the Seller

    Send me literature
    Have a salesman call me

    * fields are required