Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

TENNSMITH - 10 ft 7-inch x 14-ga Mechanical Shear with Front Drop, ID#TENN12714

TENNSMITH - 10 ft 7-inch x 14-ga Mechanical Shear with Front Drop,
We have this shear in stock, it's brand NEW, 127" cut length x 14-gauge mechanical power shear available for immediate delivery.  The LMS Series mechanical shears utilize a simple low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance. The LMS126-14 incorporates the unique 2x back gauge system. This allows the operator to move the backstop from 0 to 30 inches in approximately 2 seconds with only two rotations of the handle. The LMS 2x back-gauge comes standard with a digital readout. The 2x digital readout increments are 0.001” . The LMS Series shears are standard with four-edge, high carbon, high chrome top and bottom blades , independent, self-leveling hold down bar with neoprene insert, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metallic gibs. The LMS126-14 will handle 14-gauge mild steel, 18-gauge stainless up to 127 inches in cutting length. To enhance productivity, optional equipment available for the machine includes:  ten-foot squaring arm, t-slotted front support arms, t-slotted table with inlaid inch/metric scales, light beam and protractor attachments. Please contact us at norm@threeriversmachinery dot com or 800-753-0393 for a complete listing of optional equipment. The Tennsmith LMS126-14 comes standard with an air operated sheet support system. This system is available in two styles: System-R drops the support material to the rear of the machine; System-F returns the supported material to the front of the machine via a front return chute.

The LMS series shears are available only in a “Performance Package” configuration. The Performance Package includes: a Five Foot Squaring Arm, a pair of Front Support Arms, and Air Operated Sheet Support System. Performance “R” system is for rear return, Performance “F” system is for front return. A moveable Material Cart is available for both Front and Rear Return machines. Please call 800-753-0393 for details.

Benefits of the LMS126-14 power shear are:

          Low power consumption

          Quiet operation

          Superior quality of cut

          Fast manual back gauge

          Four Edge Top and Bottom Blades

          10’6 of cutting width

        Front return sheet support system INCLUDED

LMS126-14 Specifications

 Maximum Shearing Capacity, Mild Steel                                  14 gauge/2,0mm

Mild Steel Rated Materials at 80,000 Tensile / 44,000 Yield

Maximum Shearing Capacity, Stainless Steel                            18 gauge/1,25mm

Stainless Shear Rated Materials at 90,000 Tensile / 55,000 Yield

Maximum Cutting Length                                                      127 in/3225mm

Back gauge Range                                                              30 in/762mm

Strokes per Minute                                                             35

Number of Hold downs                                                        Solid Bar with Insert

Motor-230/460v, 3-phase, 60Hz                                            5 hp

Overall Dimensions, Less Gauges, LxWxH                                145 x 27 x 55-1/2 in

Floor Space, Gauges in Position                                             145 x 60 x 55-1/2 in

Shipping Weight                                                                 6200 lbs

Please fill out the following information:

Fax me a quote.
Send literature.
Please have a salesman call.
WWW Address:


Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2018 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 --