This 8900 makes "S" cleats and Drive Cleats and Female Pittsburgh Lock. A flexible Lockformer, designed for super high productivity of inboard cleats. The 8900 design has one inboard and two outboard forming positions allowing bearing support on both sides of the profile. These zones also can be adjusted by the operator to meet the requirements of a wide variety of gauges. With 9 forming stations, the 8900 Cleatformer can form 20-28 gauge sheet metal into "S" and drive cleats on the inboard forming positions and up to 12 auxiliary roll set profiles on the outboard forming positions at speeds averaging 100 fpm. Standard with Lockformer quality construction, this machine has a Baldor motor; high precision needle-type bearings; heavy 3/4" chassis plate; case-hardened and ground roll shafts; and an arc-welded steel stand protected with Lockformer's top-quality primer and paint finish.
Forming stations 9
Capacity 22-28 gauge for "S" cleat 20-28 gauge for drive cleat
Depth of pocket 1-1/16"
Width of drive cleat 1-1/8"
Forming speed 100fpm
Motor 5 hp, 1800 rpm, 230/460 volts, 3 phases
Dimensions 60" x 24" x 40"
Table height 32-1/2"
Ship weight Approx. 850 Ib.
This machine has been thoroughly tested, re-tested and painted. 30-day warranty. This is a nice rollformer and can be shipped common carrier.