Menu:
Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

LOCKFORMER® - 20-gauge Snaplock Rollformer, 3-Phase 230-Volt, $POR, ID#LK20GBLAZ

LOCKFORMER® - 20-gauge Snaplock Rollformer, 3-Phase 230-Volt, $POR, Form ducts in a snap The Button Punch Snap Lock Machines form a two piece seam that greatly simplifies ductwork assembly. The male seam is a button, the female seam is a lock and the two snap together for a flush corner. These machines can form 20 to 30 gauge sheetmetal into female locks on the inboard and button punched right angle flanges on outboard rolls at speeds of 60-65 fpm and are available in seven and nine forming station machines. Not only do these locks assemble twice as fast as traditional methods, but because the two pieces nest,they are easier to transport too. Standard with Lockformer's quality construction, these machines have Baldor motors; high precision needle-type bearings; heavy 3/4" chassis plate; case-hardened and ground roll shafts; and arc-welded steel stands protected with Lockformer's top-quality primer and paint finish. Alemite fittings are easily accessible from a main transmission bearing lubrication panel. For cost saving benefits, contact a Three Rivers Machinery representative today. Contact Sheetmetalmachinery.com for custom quotes on 16, 18 and 14 gauge Button Punch Snap Lock machines. Forming stations 9 Capacity 20-26 gauge Forming speed 60-65 Motor 3 hp, 3600 rpm, 230/460 volt, 3 phase Horizontal roll 4" Vertical roll centers 2-1/2" Shaft diameter 1" Dimensions 58-1/2" x 24" x 41" Ship weight Approx. 725 lbs. This machine can be picked up or shipped from 15205, please call us for an exact price to your location, it will be worth the call!!!! 800-753-0393


Please fill out the following information:

 ID#
Company:
 
Fax me a quote.
Name:
 
Send literature.
Address:
 
Please have a salesman call.
City:
State:Zip:
 
Country:
 
 
Phone:
 
 
Fax:
 
 
E-mail:
 
 
WWW Address:

 


Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2017 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 -- info@sheetmetalmachinery.com