Menu:
Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

CIDAN - 10' x 14-ga CNC Folder, Excellent, $79500, ID#CIDAN1014K

CIDAN - 10' x 14-ga CNC Folder, Excellent, $79500,

SIDE FRAMESSIDE FRAMES
Side Frames are cast iron for robust and sturdy guiding of clamping beam and folding beam. The clamping beam is eccentric driven which eliminates wear and tear during movement and gives the best possible open-ing and closing speeds. The eccentric dual drive eliminates adjustment of parameters during life of machine which insures long life on clamping motor. When clamping, the eccentric enables very high clamping pres-sure which a great advantage when closing hems.

Please call for quote to be faxed or emailed AND for additional photos. Thanks!

Clamping beam is a welded construction with a massive 2’ wide plate reinforce with gussets and back plate. The Clamping beam is positioned in the front at a 45 degrees and nose bar is at 30 degrees which enables you to form 150 degrees. Upper nose tooling is made from hard 42CrMo4 steel with .030” radius nose. The upper beam is twin driven for true parallelism during clamping. This will allow you to form bump radius parts accurately.

The ProLink Control calculates cut size and automatically creates a program. The finished part is shown with its actual folding sequence. The touch screen is mounted on a swivel arm that can be rotated for optimal viewing. If you are programming in the office you can use the optional offline-software at your computer.

Folding Length..........................................................122"
Capacity ................................................................... 14-gauge Mild Steel
                                                                                   .125 Aluminum
                                                                                   18-gauge Stainless
Opening Height of Clamping Beam ......................... 5.3” (134mm)
Clamping Beam Motor ............................................. 2.0 HP (2.7Kw)
Clamping Pressure .................................................. 14 tons
Folding Beam Motor, Dual Drive:  ............................ 2.0 HP (1.5Kw)
Folding Beam Speed, 0-140° ................................... 2.7 seconds
Folding Beam Speed, 0-140° ................................... 1.9 seconds
Air Required, static load .......................................... 80PSI (6bar)
Power Required, 3phase, 60Hz ......................... 208V / 230V
Amperage Breaker ............................................... 35amp

This brake is available for  immediate purchase and shipment with training & installation being included. 800-753-0393 or email us for many additional photos.


Please fill out the following information:

 ID#
Company:
 
Fax me a quote.
Name:
 
Send literature.
Address:
 
Please have a salesman call.
City:
State:Zip:
 
Country:
 
 
Phone:
 
 
Fax:
 
 
E-mail:
 
 
WWW Address:

 


Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2018 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 -- info@sheetmetalmachinery.com