Menu:
Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

Standard - Hydraulic/Mechanical Press Brakes, ID#STNDBRK

General Information on STANDARD's PRESS BRAKES

Start With The Best Foundation Possible ... And Build From There

 

"The most dependable machine on the market today."


 

     Over the past 35 years we have overwhelmed our customers and our competition by the uncompromising rigidity of our machinery  This rigidity coupled with our simplicity and trouble free operation has made us one of the top selling press brake manufacturers in the world.  In January of 2000 we initiated an unheard of 5 year parts and limited labor warranty that drastically separated us from our competition and we haven't stopped there.  Our newly developed press brake ram and hydraulic systems have separated Standard Industrial even more from the other brake manufacturers.

     Too many manufacturers today base their machine's productivity on computerized technology rather than the quality of the brake itself.  We here at standard Industrial start with a solid well-designed 100% U.S. made machine and then add the merits of CNC capability to provide you with the best machine on the market today.  We are one of the top suppliers of the U.S. made Automec backgauges.  We also offer from a base machine up to 6 axis CNC control including X, Y, R, X1 & X2 and Z1 & Z2.  Add to this tooling and accessories from such fine manufacturers like R-K Brake Dies and Wila and their is no doubt that you have the best brake the U.S. has to offer.

Best built, heaviest brake on the market

Least amount of deflection on any brake available

All parts covered for 5 years and afterwards a lifetime supply of available parts from local vendors

All press brakes available from base models up to 6 axis CNC control including X, Y, R, X1 & X2 and Z1 & Z2.

(Model AB100-10 Shown)

Press Brakes

 

     With full tonnage throughout the stroke and more importantly throughout the entire length of the bed and ram the Standard Industrial brake has a repeatability advantage over most dual cylinder brakes.  Direct dual cylinder brakes require complicated hydraulic and electrical systems to balance their tonnage and they require a vast amount of labor and parts as the machines age.  Typically the customer is forced to pay exorbitant prices for the parts and labor that they can only get from the manufacturer.  We at Standard pride ourselves on the fact that customers can get parts for their brake from local suppliers and the simplicity of the equipment requires only the most basic trouble shooting.

   

100% Owned, Operated and Manufactured in The U.S.A.

     
Press Brakes

     The hydraulic/mechanical system  used by Standard is certainly a superior concept as evident by the number of manufacturers currently offering  similar products.  However, we have more experience in years and thousands of products designed and manufactured than any in the business.  Our design experience is reflected in our size and type of bearings and shafts as well as our technical capability to design a bellcrank system that does not have excessive side loads.  All forces are vertical above the ram centerline and are contained in the "box" structure that houses the drive system and ram guides.

 

     The ram of the press brake is guided by heavy duty slides as used in straight side presses.  These slides are located both front and back of each end of the ram and are clearly superior to the small rear mounted guides found on other press brakes.

 
     
     
Press Brakes 

     All press brakes require guides to contain end movement of the ram. Other manufacturers use tiny segmented guides incorporated in the main ram guides.  The Standard design is to provide a heavy duty, self aligning system at the rear center of the ram and located inside the press frame.  This system requires no operator action when the ram level is adjusted.

Press Brakes

Press Brake Applications

Our brakes were specifically designed for the following applications:

 

Press Brakes     

Full length bends where full tonnage across the bed is a necessity for the truest bends
Off-center loading when any amount of the brake's tonnage is needed across the bed
Center loading where any amount of the brake's tonnage is required
Multiple die set-ups across the bed that require varying amounts of tonnage
Punching applications in one area or at varied locations across the bed - each brake has a counter balance valve to allow the least shock to the hydraulic system

Short piece work, with some of the fastest ram speeds on any brake, your small piece work is done quickly, easily and with precision

 

Press Brakes   Press Brakes
 

Any size facility will benefit for the Standard Industrial brake from the price conscious small facility that does piece by piece work up to the 3 shifts a day high production manufacturers that require dependable, low maintenance machines with readily available components for minimal downtime.

 
Press Brakes   Press Brakes    Press Brakes

April 2005 Model AB Press Brake Specifications

MODEL

Form/Punch Tonnage

Bed/ Ram Overall 

Bet. Frames

Open Height 

 

Stroke

Closed Height 

 

Below Grade (STC) 

Throat Depth 

 

Bed Width (STC) 

Approx Bed Heigh (STC) 

Weight (lbs.) (STC) 

Approx. Height (STC)

AB100-8

100/66

8'

6'-5"

13"

6"

7"

NO

6"

4"

35"

15,000

103"

AB100-10

100/66

10'

8'-5"

13"

6"

7"

NO

6"

4"

35"

19,000

106"

AB100-12

100/66

12'

10'-5"

13"

6"

7"

NO

6"

4"

35"

21,000

108"

AB150-10

150/100

10'

8'-5"

13"

6"

7"

NO

6"

4"

38"

22,000

108"

AB150-12

150/100

12'

10'-5"

13"

6"

7"

NO

6"

4"

38"

26,000

108"

AB150-14

150/100

14'

12'-5"

13"

6"

7"

NO

6"

5"

38"

31,000

112"

AB200-12

200/135

12'

10'-5"

14"

8"

6"

NO

10"

5"

38"

32,000

113"

AB200-14

200/135

14'

12'-5"

14"

8"

6"

NO

10"

6"

38"

45,000

117"

AB200-16

200/135

16'

14'-5"

14"

8"

6"

NO

10"

6"

38"

50,000

124"

AB250-12

250/165

12'

10'-5"

16"

8"

8"

NO

10"

6"

38"

40,000

123"

AB250-14

250/165

14'

12'-5"

16"

8"

8"

NO

10"

6"

38"

50,000

131"

AB250-16

250/165

16'

14'-5"

16"

8"

8"

NO

10"

8"

38"

56,000

133"

AB325-12

325/215

12'

10'-5"

16"

8"

8"

NO

10"

10"

38"

49,000

128"

AB325-14

325/215

14'

12'-5"

16"

8"

8"

NO

10"

10"

38"

60,000

134"

AB325-16

325/215

16'

14'-5"

16"

8"

8"

NO

10"

10"

42"

66,000

139"

AB400-12

400/265

12'

10'-5"

20"

10"

10"

NO

10"

10"

38"

58,000

140"

AB400-14

400/265

14'

12'-5"

20"

10"

10"

NO

10"

12"

40"

67,000

144"

AB400-16

400/265

16'

14'-5"

20"

10"

10"

NO

10"

12"

42"

80,000

146"

AB500-12

500/330

12'

10'-5"

20"

10"

10"

NO

10"

12"

38"

82,000

157"

AB500-14

500/330

14'

12'-5"

20"

10"

10"

NO

10"

12"

40"

90,000

160"

AB500-16

500/330

16'

14'-5'

20"

10"

10"

NO

10"

12"

42"

97,000

162"

AB600-12

600/400

12'

10'-5"

22"

10"

12"

NO

10"

12"

38"

87,000

159"

AB600-14

600/400

14'

12'-5"

22"

10"

12"

NO

10"

14"

40"

97,000

160"

AB600-16

600/400

16'

14'-5"

22"



Please Fill Out the Following Information
ID#
Fax me a quote.
Send literature.
Please have a salesman call.
Company:
 
Name:
 
Address:
 
City:
State: Zip:
Country:
 
Phone:
 
Fax:
 
E-mail:
 
WWW Address:
 
WWW URL:
 

Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2017 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 -- info@sheetmetalmachinery.com