Menu:
Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

Schechtl - 10' x 16-ga Mech. Shear w/ cart, NEW ONLY APRIL '17, $27000, ID#SMT310MD

Schechtl - 10' x 16-ga Mech. Shear w/ cart, NEW ONLY APRIL '17, $27000,

 

We have brand New

SCHECHTL Shears available in April 2017, place your order now to receive your shear in April.

 

Model SMT 3100

Shear Specs.

 

Working Length............................................. 123.5”

Capacity, Mild Steel....................................... 16 ga

Aluminum .....................................................  .090”

Stainless......................................................    20 ga

Strokes per Minute ........................................ 35

Motor Power, HP............................................ 4

Electrics, 3 phase, 60Hz , @ 25 amps .......... 220

Weight .......................................................... 3,110 lb.

Length ........................................................... 133”

Depth.............................................................. 65”

Height............................................................. 46”

BACKGAUGE AND REAR SHEET SUPPORT SYSTEM

Schechtl shears come standard with a 30” front operated backgauge. the pneumatic rear sheet support holds the material up during the cutting process. Only after the cutting is completed will the sheet support drop the material to the front. The rate of drop is fully adjustable based on type of material.

The backgauge indicator and lever lock is located on the front/right side of the shear. Once the desired dimension is dialed in, the operator ulitlizes a lever to lock in place. The backgauge postioning is fast, from 0-30” in 7 seconds! 

SQUARING ARM - This shear is equipped with a 40” squaring arm on the left side and 16” on right. An in-laid inch scale is provide with all squaring arms. On the table bed, every 1/32” is small scribe line and every ½” is large scribe. If the part is too small for the operator to hit up against the backgauge, the scribe lines enable an operator to front gauge.

FRONT TELESCOPING SHEET SUPPORT- 36” Telescoping Sheet Support is needed for one operator positioning of a new sheet to the shear. This is a nice feature because it keeps the material from drooping, and the operator can slide it in or out when it’s not in use. Plus you will have it up against the shear when presenting a forklift to the material wagon.

Material wagon eliminates labor cost. The wagon can be moved from underneath the shear eliminating unloading while on your knees. The material wagon enables the operator to wheel or fork-lift the whole stock to the folder.

Call 800-753-0393 or email us at norm@threeriversmachinery.com to reserve your shear today, as of Feb. 11, 2017, we have four (4) left for April delivery. Thank you. 



Please Fill Out the Following Information
ID#
Fax me a quote.
Send literature.
Please have a salesman call.
Company:
 
Name:
 
Address:
 
City:
State: Zip:
Country:
 
Phone:
 
Fax:
 
E-mail:
 
WWW Address:
 
WWW URL:
 

Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2017 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 -- info@sheetmetalmachinery.com