Menu:
Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

Famco - 10-Gauge to 1/4" Mild Steel; 7/8 ABS 4' to 12' Lengths, ID#FAMSHR

 

The power mechanism sets the FAMCO Air Shear apart; two deliver the full rated capacity. Features FAMCO quality construction, including all-steel, box-type bed and members for rugged, rigid support. Installations fast and easy; simply connect the air line and wire the solenoid valve to any 115 volt AC control panel.

Available in 12GA; 14GA; 16GA. Capacities in mild steel and up to 1/4" ABS Plastic, in 24" to 84" cutting widths.

 

"P-100B" Series feature an anti-friction clutch and brake. The orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. This 360' engagement clutch provides instantaneous, accurate shear operation - assuring the consistent repetition essential to effective cut-to-length lines and feed operations of all kinds.

Available in 14 GA; 16GA; 18GA capacities in mild steel and up to 1/4" ABS Plastic, in 24" to 72" cutting widths.

 

"P-WG" Series transmissions feature a silent worm gear, with an anti-friction clutch and brake. The worm is part of the one-piece clutch shaft to insure true rigidity. Worm and gear rotate only during the cutting stroke - a fraction of the total operation time of the shear. The Orttech pneumatic clutch and brake are trouble-free units, self-compensating for wear. The gear box with a 15 to 1 ratio offers smooth operation with high torque capability.

Available in 10GA; 12GA and 14 GA in mild steel and up to 3/8" ABS plastic in 24" to 10 ft cutting widths.


 10, 12 and 14 Gauge Mild Steel; 1/4 ABS 24" to 84" Cutting Length

"PC" Series Shears are equipped with a compact, low-inertia, high-torque pneumatic friction clutch and brake. These trouble-free units never need adjusting, as they self-compensate for wear. This 360' engagement clutch provides instantaneous, accurate shear operation - assuring the consistent repetition essential to effective cut-to-length lines and continuous feed operations of all kinds.


P-W series

10 Gauge to 1/4" Mild Steel; 7/8 ABS 4' to 12" Cutting Length

The most modern design is incorporated in this rugged, big capacity series of FAMCO squaring shears. Whether cutting to capacity or very light gauge material, each cut is square and accurate . Fast air clutch engagement makes the shear in this series ideal for high production.


P-PC-HD series

HEAVY DUTY 3 Models - 10 Gauge 52" - 60"-72" Cutting Length

High Speed 10 gauge cut-to-length line shear. Air clutch, air brake, DC control circuitry and 250 stroke per minute operation makes this shear ideal for high production, accurate shearing. Also available in 10 gauge 80" wide, 3/16"-72" wide, and 1/4"-52" wide capacities. Passline height is 42" shown.


P-W-OHD series

OVERHEAD DRIVE SHEAR Models 3/16" - 1/4" 7/8 ABS 96" - 12' Cutting Length *Flat Bed Design

8 additional models available in FLAT BACK DESIGN 10 and 14 gauge, 60" - 72" cutting length including (4) straight upper knife models and (4) bowtie-reversed upper knife models. See pages 13 and 14 for detail engineering data.


8 additional models available upon request - *10 and 14 Gauge 60" - 72" Cutting Length (4) Straight Upper Knife Models (4) Bowtie - Reversed Upper Knife Models

Please call us toll free at 1-800-753-0393 or fillout the form below and we will quote you a FAMCO Shear specifically designed for your shearing requirements.



Please Fill Out the Following Information
ID#
Fax me a quote.
Send literature.
Please have a salesman call.
Company:
 
Name:
 
Address:
 
City:
State: Zip:
Country:
 
Phone:
 
Fax:
 
E-mail:
 
WWW Address:
 
WWW URL:
 

Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2017 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 -- info@sheetmetalmachinery.com