Menu:
Post Machines Wanted - Charts  - Contact Us 
Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Inquire & Order Parts
Iron Worker Punches & Dies Inquiry
Shear Blades Inquiry

Automec - CNC150 Gauge System, "Our #1 Seller", ID#AMCNC150

CNC150 AUTOGAUGE

 

The CNC150 is an economical, simple to use control that incorporates the most popular features used in our 30-plus years experience in the pressbrake backgauging industry. It offers 150 job memory storage with up to 20 bends per job. The CNC150 will control any of the backgauge configurations allowing the operator to form the complete workpiece in one handling by controlling the backgauge, ram depth and gauge bar height of each bend.

 

 

The CNC150 is our most popular control and is a simple low-cost way to improve your pressbrake productivity. Productivity increases of over 40% are typical when using this system over manual gauging. While simple, the CNC150 still offers enhanced features like reversal on pinch point and backgauge retract and delays. On 2-Axis hydraulic brakes backgauge retract on pinch point allows you to program the backgauge to retract once the workpiece is pinched in order to clear reverse bends. The backgauge retract/delay feature allows the operator to program the backgauge to retract away from the die a specified time and distance to allow the operator time to reposition the workpiece. Both the time and distance of retract can be programmed separately for each bend.

 

All electronics are housed in a single control panel featuring easy to read LED’s. The velvet-lexan front panel features high-feedback tactile feel pushbuttons. A parts counter keeps track of total parts formed and can be viewed simply by pressing one button. When you release the button you automatically return to the program. A ram offset ± .099” and bend allowance of ± .999 can be programmed for each job to offset all dimensions in the program by the same amount.

 

The CNC150 backgauge system comes with a two-year warranty.

 

CONTROL SPECIFICATIONS

  • 11-digit part storage
  • 150 jobs (00 to 150)
  • 20 bends per job
  • Programming delay/retract between bends (0 – 9 seconds)
  • Bend allowance ± .393”
  • Calculator to change dimensions incrementally
  • Parts counter
  • 1, 2, or 3 axis
  • .001” resolution
  • Red L.E.D. display
  • IN/MM conversion
  • Membrane Keyboard
  • 30-day battery back up
  • Input power - 115 VAC ± 10% 50/60 HZ, 1A MAX (Control)
  • 2 year control warranty

You can actually see the gauge in operation by click the link here> http://www.automec.com/cnc150_video.htm

Call us toll free at 800-753-0393 or fill-out the form below for you delivered price quotation on this fine addition to your Press Brake operation.  LOWEST PRICE OFFERED!

 



Please Fill Out the Following Information
ID#
Fax me a quote.
Send literature.
Please have a salesman call.
Company:
 
Name:
 
Address:
 
City:
State: Zip:
Country:
 
Phone:
 
Fax:
 
E-mail:
 
WWW Address:
 
WWW URL:
 

Home | Gallery | New Machines | Used Machines | Parts/Tooling | Leasing | Service | Advertising
Copyright © 2007-2017 Three Rivers Machinery. All rights reserved.
Three Rivers Machinery -- 1079 East Windhaven Road -- Pittsburgh, PA 15205 -- Map
Phone (412) 921-2800 7AM-5PM EST -- 24/7 Fax (412) 921-2801 -- info@sheetmetalmachinery.com